|
[site
home]
[projects home]
| Kit enquiries and HOW TO ORDER: |
PCB production and kitting is handled by Eric GW8LJJ
email
"eric (at) eddy11 (dot) fsnet (dot) co
(dot) uk"
Payment by cheque, cash or PayPal but please contact Eric
first. |
| |
Prices have been kept to a minimum by
using quantity breaks and free inward delivery where possible.
There is no mark-up on component prices. Putting these kits
together is time consuming, and we are greatly indebted to Eric GW8LJJ for his
dedication to the dying art of home construction. Eric has single-handedly etched, tinned and drilled the PCBs for each
module . All PCBs are quality inspected for track splashes and
un-drilled holes.
*August 2011*
Regretfully we have had to
increase kit prices in line with component and material costs to
avoid making a loss on all orders.
We continue to offer these
kits to the amateur radio community on a non-profit basis. |
|
FAT5 series kits
| Module |
Contents: |
Price (excl. p&p) |
|
Multi-Rock RF source
* |
Complete kit
incl. PCB |
£16.50 |
| |
PCB / PIC only |
p.o.a. |
|
RF PA |
Complete kit
incl. PCB |
£14.80 |
| |
PCB only |
£5.50 |
|
FAT-MAX processor |
Complete kit
incl. PCB |
£25.00 |
|
PCB
only |
£4.00 |
|
TDA2050 Modulator |
Complete kit incl.
PCB |
£12.00 |
| |
PCB only |
£3.50 |
|
LM3886 Modulator |
Complete kit incl
PCB |
£12.00 |
| |
PCB only |
£3.50 |
|
PUWMA PWM # |
1. Complete kit
incl. both PCBs |
£45.00 |
| [State option 1,2,3] |
2. Complete kit minus LPF PCB |
£41.00 |
| |
3. PCB set (PWM
PCB + LPF PCB) |
£8.00 |
* The forthcoming Multi-rock II will be the recommended RF source for
new builds when available
UK P&P is £2.00 for single item except PUWMA options 1 and 2,
where
postage will be £2.50 in UK due to weight of dust-iron cores. Overseas
please enquire.
| # Some of the PUWMA components are expensive, particularly the PWM chip
and the T200-26 cores, which have taken some time to source reliably and
this has affected the pricing. We have been caught out before, and now
only use components from well-known suppliers. This kit gives excellent
performance when used correctly, but PWM can cause considerable
interference when used without a proper low pass filter. We have therefore
taken the decision not to supply the PWM components without also supplying
the LPF components (option 1 or 2). We will however supply the PWM PCB
with no components, but
only as a set with the LPF PCB (option 3). |
Other kits :
* UK P&P is £2.00 for single item except PUWMA options 1 and 2,
where
postage will be £2.50 in UK due to weight of dust-iron cores.
Shipment cost will be less for combined orders.
Overseas
shipments priced individually depending on country and weight.
[site
home]
[projects home]
|